LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (3.2L VR6 4V Engine Mechanical, Fuel Injection Ignition, Engine Code(S): BJS) >> 13 - Engine - Crankshaft, Cylinder Block >> Crankshaft, removing and installing >> Crankshaft, removing and installing

Crankshaft, removing and installing

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.

Assembly overview, refer to Assembly overview 

Sensor wheel to crankshaft, installing, refer to Sensor wheel to crankshaft, installing  

NOTE:
  • Before removing the crankshaft, prepare a suitable place to store the crankshaft to make sure that the sensor wheel (item - 6  - ) does not make contact or become damaged.
  • When performing repair work, secure engine to engine and transmission holder VAS 6095 or holding fixture VW 540 with supplementary set VW 540/1 B.
  • When changing bearing shells ensure that only bearing shells with yellow color code are used.
scientia non olet · About LEMON Manuals