Sensor wheel to crankshaft, installing

Special tools, testers and auxiliary items required

Fig 1: Torque Wrench V.A.G. 1331 (5 To 50 Nm)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Torque wrench V.A.G 1331
• D 000 600 A2 Locking compound

Work procedure 

Make sure crankshaft/sensor wheel contact surfaces are free of oil and grease.

• Apply a thin coat of locking compound "D 000 600 A2" to contact surfaces of crankshaft and sensor wheel for additional security.
• Check that when installing "VR6" - arrow  - is marked at individual threaded holes.
• Tighten all new securing bolts lightly by hand.

Fig 2: Identifying VR6 And Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• First, tighten bolt - 1  - to 10 Nm plus additional 90 ° ( ¹ / ₄ turn).
• Tighten securing bolts - 2  - to 10 Nm plus additional 90 ° (1/4 turn).