LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Battery, Starter, Generator, Cruise Control (A3 Platform)) >> Starter motor >> Starter motor, removing and installing >> Notes

Starter motor, removing and installing: Notes

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Before working on the electrical system:
  • Obtain radio anti -theft code.
  • Ignition OFF !
  • Disconnect battery Ground (GND) strap.
NOTE:
  • After reconnecting battery:
    • Activate vehicle equipment such as radio, clock and power windows as per Repair Manual and/or Owner's Manual.
    • On vehicles equipped with OBD II, activate readiness code

      Refer to appropriate ON BOARD DIAGNOSTIC (OBD) article.

  • Starter bushing, removing and installing (manual transmission)

For 020 transmission, refer to EXTRACTING BUSHING FOR STARTER

For 02A transmission, refer to REMOVING STARTER BUSHING .