List of selectable functions

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

LIST OF SELECTABLE FUNCTIONS, ANTI-THEFT IMMOBILIZER - CABRIO UP TO MAY 1999

Function No.	Function	Section
01 -	Check control module versions	See VAG 1551 SCAN TOOL, CONNECTING AND SELECTING FUNCTIONS
02 -	Check DTC memory	See DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, CHECKING
05 -	Erase DTC memory	See ERASING DTC MEMORY
06 -	End output	See ENDING OUTPUT
07 -	Code control module	See IMMOBILIZER CONTROL MODULE, ADJUSTING AFTER REPLACING (CODE CONTROL MODULE)
08 -	Read Measured Value Block	See Read Measuring Value Block (function 08)
10 -	Adaptation	See IGNITION KEYS, MATCHING (ADAPTATION) and ENGINE CONTROL MODULE OR FUEL CUT-OFF VALVE CONTROL MODULE, PROCEDURE AFTER REPLACING
11 -	Login procedure	See IGNITION KEYS, MATCHING (ADAPTATION)

NOTE:

Do not select further functions, which can be printed out after pressing HELP button.
After function is completed VAG 1551 returns to the following start position:

Indicated on display:

Fig 1: Identifying VAG 1551 Scan Tool Display (Rapid Data Transfer) (Cabrio Up To May 1999)

Courtesy of VOLKSWAGEN OF AMERICA, INC.