Measuring value block, reading: Notes
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen Golf, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, and 1998 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Check the airbag system wiring by visual inspection only.
- Do not check continuity or resistance of the airbag igniter circuits.
- Switch off ignition before checking routing of wiring.
Indicated on display
Fig 1: Identifying VAG 1551 Scan Tool Display (Reading Measuring Value Block, From 09.94 & Up) (1 Of 5)
- Press buttons -0- and -8- to select "Read measuring value block", function 08
Indicated on display
Fig 2: Identifying VAG 1551 Scan Tool Display (Reading Measuring Value Block, From 09.94 & Up) (2 Of 5)
- Press -Q- button to confirm input.
Indicated on display
Fig 3: Identifying VAG 1551 Scan Tool Display (Reading Measuring Value Block, From 09.94 & Up) (3 Of 5)
- Select desired display group number and press - Q- button to confirm input.
Indicated on display
Fig 4: Identifying VAG 1551 Scan Tool Display (Reading Measuring Value Block, From 09.94 & Up) (4 Of 5)
For a key to the content of each display field see Display Group No. 001 , Evaluation for display group No. 001 , Display group No. 003 , Evaluation of display group No. 003 , Display group 005 and Evaluation for display group No. 005 .
If all displays are correct:
- Press --> button.
Indicated on display
Fig 5: Identifying VAG 1551 Scan Tool Display (Reading Measuring Value Block, From 09.94 & Up) (5 Of 5)
NOTE:
After completing checks of "Read Measuring Value Block", function 08, check DTC memory. See CHECKING DTC MEMORY
.