Engine and transmission mounts, aligning

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required

Fig 1: Identifying Engine Support Bridge 10 - 222 A

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Engine support bridge 10 - 222 A
Frame 10 - 222 A /1
Adapter 10 - 222 A /3

CAUTION: Before loosening bolts, secure assembly using engine support bridge 10 - 222 A.

Fig 2: Engine Mount Dimensions

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Engine mounting

Dimension - a - = 14.0 mm

Dimension - b - = minimum 10.0 mm

Both bolt heads - 1 - must be flush with edge - c -.

Fig 3: Transmission Mount Dimensions

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Transmission assembly mounting

Edges - a - and - b - must be parallel to each other.

Torque settings for assembly mountings, refer to Assembly mounting .