LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Golf GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (3.2L VR6 4V Engine Mechanical, Fuel Injection Ignition, Engine Code(S): BJS) >> 10 - Engine - Assembly >> Engine, removing and installing >> Assembly mounting

Assembly mounting

WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.

Torque specifications

Fig 1: Engine Mounting Bolts
GW00000016Courtesy of VOLKSWAGEN UNITED STATES, INC.

Engine mounting

1 - Mounting to body * See note 40 Nm + 90 ° ( 1 / 4 turn)
2 - Support to mounting at body * See note 20 Nm + 90 ° ( 1 / 4 turn)
3 - Mount to engine bracket 100 Nm

* Replace bolts

Fig 2: Transmission Mounting Bolts
GW00000017Courtesy of VOLKSWAGEN UNITED STATES, INC.

Transmission assembly mounting

1 - Mounting to body * See note 40 Nm + 90 ° ( 1 / 4 turn)
2 - Mounting to body * See note 20 Nm + 90 ° ( 1 / 4 turn)
3 - Mounting to transmission console 100 Nm

* Replace bolts

Fig 3: Pendulum Supports Mounting Bolts
GW00000018Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pendulum supports

1 - Pendulum supports to transmission 50 Nm
2 - Pendulum supports to transmission 50 Nm
3 - Pendulum supports to subframe 25 Nm
scientia non olet · About LEMON Manuals