Anti-theft alarm system overview: Notes
CAUTION:
Before working on the electrical system:
- Obtain radio anti-theft code.
- Ignition OFF !
- Disconnect battery Ground (GND) strap.
NOTE:
- After reconnecting battery:
- Activate vehicle equipment such as radio, clock and power windows as per appropriate article and/or Owner's Manual.
- On vehicles equipped with OBD II, activate readiness code. See READINESS CODE, CREATING in appropriate ON BOARD DIAGNOSTIC (OBD) .
NOTE:
The following list refers to items in Fig 1.
- - Alarm system control module -J284-
- Removing/installing, refer to Alarm system control module -J284-, removing and installing
- - Alarm horn -H8-
- Removing/installing, refer to Alarm horn -H8-, removing and installing
- - Hood alarm switch -F120-
- Removing/installing, refer to Hood alarm switch -F120-, removing and installing
- - Trunk lid alarm switch -F123-
- - Trunk lock alarm/central locking switch -F124-
- Removing, refer to Lock alarm/central locking switch -F124-, removing
- Identifying, refer to Trunk lock alarm/central locking switch, identifying
- Installing, refer to Trunk lock alarm/central locking switch, installing
- - Door contact switches -F2-, F3 -, -F10, -F11 -
- - Driver's door central locking system switch -F59-
- - Alarm system indicator light -K95-
- Removing/installing, refer to Alarm system indicator light -K95-, removing