Trunk lock alarm/central locking switch, installing

• Press contact switch -2- onto locating pins.
• Install retaining plate around contact switch.

Fig 1: Installing Trunk Lock Alarm/Central Locking Switch

Courtesy of VOLKSWAGEN OF AMERICA, INC.

NOTE:

• Ensure contact switch wiring is correctly routed.
• Before installing rear lid lock, check contact switch installation position by operating lock cylinder.

• Install rear lid lock.

  Refer to REAR LID LOCK, REMOVING AND INSTALLING UP TO 03.98 or REAR LID, REMOVING AND INSTALLING LOCK FROM 03.98 AND ON .

• Connect 2-pin connector.
• Install rear lid trim.