Read Measuring Value Block: Notes
WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2009 Volkswagen Golf, 2008 Volkswagen Golf, 2007 Volkswagen Golf, 2006 Volkswagen Golf, and 2006 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Only visual check of wiring!
- Do not carry out electrical continuity tests or measurements to ignition circuits!
- Only check wiring with ignition switched off!
Indicated on display:
| Rapid data transfer HELP Select function XX |
- Press buttons -0- and -8- (08 initiates the "Read Measuring Value Block" function).
Indicated on display:
| Rapid data transfer Q 08 Read Measuring Value Block |
- Confirm entry with the -Q- button.
Indicated on display:
| Read Measuring Value Block HELP Input display group number XXX |
- Select relevant display group number and confirm entry with -Q- button.
Indicated on display: (1 to 4 = Display zones)
| Read Measuring Value Block 1 → 1 2 3 4 |
The explanation of the individual display zones on the display is found in the evaluation of display group numbers. Refer to Evaluation for display group number 001 .
NOTE:
Some of the indicated display groups are only meaningful for respective vehicle equipment (e.g. side airbag).
If the displayed values in all display zones are "correct":
- Press → button.
Indicated on display:
| Rapid data transfer HELP Select function XX |
NOTE:
Check DTC memory after completing the function "Read Measuring Value Block". Refer to Check DTC Memory
.