1.8L Turbo and 2.8L VR6 & 2.0L (codes AVH & AZG)

WARNING: This page is about a different variant/trim than selected.

Display Group	Display Field	Designation	Test Conditions	Display	Corrective Actions
66	2 1)	Clutch vacuum vent valve -F36- and Brake switch -F47-	Clutch and brake not depressed	1000 1)	Check for open/short circuit in wiring and connections to -F36- and/or -F47- using wiring diagram Checking -F36- and/or -F47-. Refer to 24 MULTIPORT FUEL INJECTION (MFI) for 1.8 LITER 4-CYL. 5V TURBO FUEL INJECTION & IGNITION, ENGINE CODE(S): AWD, 24 MULTIPORT FUEL INJECTION (MFI) for 1.8 LITER 4-CYL. 5V TURBO FUEL INJECTION IGNITION, ENGINE CODE(S): AWW, AWP, 24 MULTIPORT FUEL INJECTION (MFI) for 2.0 LITER 4-CYL. 2V ENGINE MECHANICAL, FUEL INJECTION & IGNITION, ENGINE CODE(S): AEG, AVH, AZG, BBW, BEV, 24 MULTIPORT FUEL INJECTION (MFI) for 2.8 LITER VR6 2V FUEL INJECTION IGNITION, 24 MULTIPORT FUEL INJECTION (MFI) for 2.8 LITER VR6 4V FUEL INJECTION IGNITION and 24 - MULTIPORT FUEL INJECTION (MFI) for 3.2 LITER VR6 4V ENGINE MECHANICAL, FUEL INJECTION IGNITION, ENGINE CODE(S): BJS
			Brake depressed	1011
			Clutch depressed	1100
	4	Cruise control switch -E45-	-E45- in OFF position	0000	Check for open/short circuit in wiring and connections to -E45-, -E227- and Engine Control Module (ECM) using wiring diagram
			-E45- in OFF position before switch point	0001
			-E45- in ON position	0011
			-E45- in RES position	1011
		Button for cruise control SET -E227-	-E45- in ON position -E227- SET button depressed	0111

1) If the value indicated in display field 2 begins with 0 the cruise control system is not activated (e.g.: 0000 = clutch and brake not depressed, system not activated). To activate cruise control. Refer to Cruise control system - 1.8L Turbo, 2.0L (codes AVH & AZG) and 2.8L VR6, activating .