Adaptation (function 10): Notes
WARNING: This page is about a different variant/trim than selected.
Use this function to initiate and store the following changes:
- Adaptation of odometer reading when replacing/exchanging instrument cluster.
- Adaptation of fuel gauge reading.
- Adaptation of Multi-function Indicator (MFA) fuel consumption indicator (where applicable).
Individual functions are called up using the appropriate channel number from adaptation table. Refer to ADAPTATION TABLE .
ADAPTATION TABLE
| Adaptation channel | Adaptation functions | |
| 03 | Multi-function Indicator (MFA) fuel consumption indicator (where applicable), adaptation. Refer to Multi-function Indicator (MFI) fuel consumption indicator, adaptation | |
| 09 | Odometer, adaptation. Refer to Odometer, adaptation | |
| 16 | Distance impulse number (K-number), reading/confirming. Refer to Distance impulse number (K-number), reading/confirming | |
| 30 | Fuel gauge, checking/adaptation. Refer to Fuel gauge, checking | |
NOTE:
After changing an adaption value or ending an adaption channel the function "10 - Adaption" must be performed to select another adaption channel!