Multi-function Indicator (MFI) fuel consumption indicator, adaptation

• Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch on ignition and enter address word 17 "instrument cluster".
• Press -Q- button to confirm input.
• Press → button until "Select function" appears in display.

Indicated on display:

Rapid data transfer HELP Select function XX

• Press buttons -1- and -0- to select "Adaptation" function 10.

Indicated on display:

Rapid data transfer Q 10 - Adaptation

• Press -Q- button to confirm input.

Indicated on display:

Adaptation Enter channel number XX

• Press buttons -0- and -3- to select adaptation "channel 03".
• Press -Q- button to confirm input.

Indicated on display:

Channel 03 Adaptation 100 → < - 1 3- >

• Press → button to continue.

Indicated on display:

Channel 03 Adaptation 100 Enter adaptation value XXXXX

• Input desired correction value using scan tool button pad, filling initial positions with "0".

Example:

Desired input value: 90% = button pad entry: 00090

Indicated on display:

Channel 03 Adaptation 100 Q Enter adaptation value 00090

• Press -Q- button to confirm input.

Indicated on display:

Channel 03 Adaptation 90 Q < - 1 3- >

• Press -Q- button to confirm input.

Indicated on display:

Channel 03 Adaptation 90 Q Store changed value?

• Press -Q- button to confirm input.

Indicated on display:

Channel 03 Adaptation 90 → Changed value is stored

• End consumption indicator adaptation with → button.

Indicated on display:

Rapid data transfer HELP Select function XX

If the following display appears:

Function is unknown or → cannot be carried out at the moment

• Press → button.
• Select function "10 - Adaptation" and adaptation channel 03 again.
• Carry out corrections to consumption indicator and confirm with Q button.