Transmission gear oil level, checking
WARNING: This page is about a different variant/trim than selected.
Transmission gear oil specification: see CODE LETTERS, ENGINE/TRANSMISSION APPLICATIONS, RATIOS, CAPACITIES .
- Turn steering to left to full lock.
- Remove filler plug (arrow) to check oil level.
Oil level is correct if it is up to lower edge of filler plug hole.
NOTE: When filling the transmission with new oil, add oil through the filler hole until the level reaches the lower edge of the filler hole. - Install filler plug (arrow).
Tightening torque: 25 N.m (18 ft lb)