Shift linkage operation and components
WARNING: This page is about a different variant/trim than selected.
- - Selector rods for vertical plane
- Selector lever moving forward and backward
- Operation shown by arrows - A- (black)
- - Selector rods for horizontal plane
- Selector lever moving side to side
- Operation shown by arrows -B- (white)
- - Selector lever housing and selector lever
. See Fig 2.
- Overview, see SELECTOR LEVER HOUSING AND SELECTOR LEVER, OVERVIEW
- - Shift linkage relay points on transmission
. See Fig 2.
- Overview, see ASSEMBLY OVERVIEW - SHIFT LINKAGE RELAYS ON TRANSMISSION
Removing and installing shift linkage, see SELECTOR LEVER AND SELECTOR ROD, REMOVING AND INSTALLING
Adjusting shift linkage, see SHIFT LINKAGE, ADJUSTING
CAUTION:
Before working on the shift linkage:
- Obtain the security code for the anti-theft radio.
- Disconnect the battery Ground (GND) strap.
NOTE:
- Lubricate all joints and friction surfaces with MoS2 grease.