Clutch pedal, removing and installing: Removing

WARNING: This page is about a different variant/trim than selected.

Remove over-center spring, see OVER-CENTER SPRING, REMOVING AND INSTALLING .
Disconnect clutch cable from clutch pedal, see CLUTCH CABLE, REMOVING AND INSTALLING .
Remove clutch pedal retaining clip from pivot pin by using screwdriver to press tab in direction of arrow -1- and pressing clip in direction of arrow -2-.

Fig 1: Removing Clutch Pedal Retaining Clip From Pivot Pin
Courtesy of VOLKSWAGEN OF AMERICA, INC.
Remove brake pedal retaining clip from pivot pin by inserting screwdriver below tab -A- and pressing clip off toward instrument panel (in direction of arrow).
Pull pivot pin out to right until clutch pedal can be removed.

Fig 2: Removing Brake Pedal Retaining Clip From Pivot Pin
Courtesy of VOLKSWAGEN OF AMERICA, INC.