LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 1997 >> Cabrio Automatic >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Body Exterior, Interior, On Board Diagnostic (OBD) >> On Board Diagnostic (OBD) from 09.94 and up >> Output Diagnostic Test Mode (DTM) (function 03) >> Notes

Output Diagnostic Test Mode (DTM) (function 03): Notes

The function "Crash output" is checked with Output Diagnostic Test Mode (DTM).

When airbags are ignited the central locking is switched to "unlock", the interior lights are switched "on" and the engine switched off.

NOTE:
  • Before performing the Output Diagnostic Test Mode (DTM), switch central locking to "lock" (operate interior lock switch).
  • Switch interior light switch to position "door contact".
  • Start engine.
  • After completing the Output Diagnostic Test Mode (DTM) the central locking controls are not active until the ignition has been switched off and on again.

    - Connecting scan tool. See Scan tool, connecting VAG1551 or VAS5051  . Initiating On Board Diagnostic (OBD). See Airbag On Board Diagnostic (OBD), initiating  .

scientia non olet · About LEMON Manuals