List of selectable functions
A list of functions can be printed out by pressing HELP button:
SELECTABLE FUNCTIONS LIST, OBD - UP TO 08.94
| List of functions | See: |
|---|---|
| 01 - Check control Module version | CHECK CONTROL MODULE VERSIONS (FUNCTION 01) |
| 02 - Check DTC memory | DIAGNOSTIC TROUBLE CODE MEMORY, CHECKING |
| 05 - Erasing DTC memory | ERASE DTC MEMORY (FUNCTION 05) AND END OUTPUT (FUNCTION 06) |
| 06 - End output | ERASE DTC MEMORY (FUNCTION 05) AND END OUTPUT (FUNCTION 06) |
NOTE:
- Only functions listed can be used at present for On Board Diagnostic.
- A list of possible functions is printed out after pressing the HELP key.
- Do not select further functions, which can be printed out after pressing the HELP key.
- After pressing --> button, VAG 1551 program returns to initial position
Indicated in display (clear for function selection, e.g. 02 - Check DTC memory):