Air Ionizer Removal And Installation/Replacement

Mobile Repair Possible:  No

Removal Procedure: 

1. Remove HVAC assembly. Refer to HVAC ASSEMBLY REMOVAL AND INSTALLATION/REPLACEMENT 

   Courtesy of VINFAST, LLC

2. Unlock and disconnect electrical connector (1).
3. Remove 2 screws (2)

   Torque: 1 Nm 

4. Remove air ionizer (3).

Installation Procedure: 

1. Installation is the reverse of removal procedure, noting the following. All fasteners must be tightened to torque specification! 
2. Install HVAC assembly. Refer to HVAC ASSEMBLY REMOVAL AND INSTALLATION/REPLACEMENT