Front Floor Console Cup Holder Assy Removal And Installation/Replacement

Mobile Repair Possible:  Van/Car

Overview: 

Removal Procedure: 

1. Remove front floor console cup holder bezel trim. Refer to FRONT FLOOR CONSOLE CUP HOLDER BEZEL TRIM REMOVAL AND INSTALLATION/REPLACEMENT 
2. Remove 8 screws (1).

   Torque: 2.5 Nm 

3. Remove front floor console cup holder bezel trim (2).

Installation Procedure: 

1. Installation is the reverse of removal procedure, noting the following.
2. Install front floor console cup holder bezel trim. Refer to FRONT FLOOR CONSOLE CUP HOLDER BEZEL TRIM REMOVAL AND INSTALLATION/REPLACEMENT