Front Bumper Fascia Skid Plate Removal And Installation/Replacement

Mobile Repair Possible:  No

Removal Procedure: 

1. Remove underbody front air shield. Refer to UNDERBODY FRONT AIR SHIELD REMOVAL AND INSTALLATION/REPLACEMENT
2. Remove 15 screws (1).

   Torque: 2.6 Nm 

3. Remove front bumper fascia skid plate (2).

Installation Procedure: 

1. Installation is the reverse of removal procedure, noting the following. All fasteners must be tightened to torque specification! 
2. Install underbody front air shield. Refer to UNDERBODY FRONT AIR SHIELD REMOVAL AND INSTALLATION/REPLACEMENT