Front Side Turn Signal Lamp Removal And Installation/Replacement

Mobile Repair Possible:  Van/Car

Removal Procedure: 

The procedure for the left-hand component is identical to that for the right-hand side. 

1. Remove front wheel opening molding. Refer to FRONT WHEEL OPENING MOLDING REMOVAL AND INSTALLATION/REPLACEMENT

   Courtesy of VINFAST, LLC

2. Press the latches (1) together in the direction of the arrow and remove the side reflector.

Installation Procedure: 

1. Installation is the reverse of removal procedure noting the following.
2. Install front wheel opening molding. Refer to FRONT WHEEL OPENING MOLDING REMOVAL AND INSTALLATION/REPLACEMENT