LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> Supra Base, Automatic Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System - Service Information >> Airbag Cut-Off Switch >> Removal [07/2020 - ] >> Procedure

Removal [07/2020 - ]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    WARNING:
    • Wait at least 60 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
    • If the airbag deploys for any reason, it may cause a serious accident.
    GTY684647Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE NO. 1 INSTRUMENT SIDE PANEL 

    Refer to PROCEDURE - Step 8

  3. REMOVE AIRBAG CUT OFF SWITCH CYLINDER SUB-ASSEMBLY 
    1. Detach the clamps (1) to remove the airbag cut off switch cylinder sub-assembly (2).
      GTY893101Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002