LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> Prius Plug-In Hybrid SE >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Pan And Oil Level Sensor >> Removal [12/2022 - 03/2023] >> Procedure

Removal [12/2022 - 03/2023]: Procedure

  1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 2

  2. DRAIN ENGINE OIL 

    Refer to PROCEDURE - Step 2

  3. REMOVE OIL PAN SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 53
  4. REMOVE ENGINE OIL LEVEL SENSOR 
    1. GTY1150882Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the engine oil level sensor connector.
      2. Remove the clip from the engine oil level sensor.
      3. Using an 8 mm socket wrench, remove the 2 bolts and engine oil level sensor from the stiffening crankcase assembly.
scientia non olet · About LEMON Manuals