LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> Prius Plug-In Hybrid SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System - Service Information (2 Of 4) >> Front Crankshaft Oil Seal >> Removal [12/2022 - 03/2023] >> Procedure

Removal [12/2022 - 03/2023]: Procedure

  1. REMOVE FRONT WHEEL RH 

    Refer to REMOVAL [12/2022 - ]

  2. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY 
    1. GTY1145059Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE REAR ENGINE UNDER COVER RH 
    1. GTY1152135Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE CRANKSHAFT PULLEY ASSEMBLY 
    Refer to PROCEDURE - Step 13
  5. REMOVE TIMING CHAIN COVER OIL SEAL 
    1. GTY1146973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using a screwdriver, pry out the timing chain cover oil seal.
        NOTE:

        Do not damage the surface of the timing chain cover oil seal press fit hole or the crankshaft.

scientia non olet · About LEMON Manuals