LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> Prius Plug-In Hybrid SE >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Panels / Trim - Service Information (2 Of 2) >> Front Door Belt Moulding >> Removal [12/2022 - 03/2023] >> Procedure

Removal [12/2022 - 03/2023]: Procedure

  1. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY 

    Refer to DISASSEMBLY [12/2022 - 03/2023]

  2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH 

    Refer to PROCEDURE - Step 9

  3. REMOVE NO. 3 FRONT DOOR SERVICE HOLE COVER 

    Refer to PROCEDURE - Step 13

  4. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY 

    Refer to PROCEDURE - Step 7

  5. REMOVE FRONT DOOR BELT MOULDING ASSEMBLY 
    1. GTY1158076Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
      1. Apply protective tape around the front door belt moulding assembly as shown in the illustration.
      2. Disengage the 6 claws as shown in the illustration.
scientia non olet · About LEMON Manuals