LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> GR86 Base, Automatic Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating / Air Conditioning System - Service Information >> Air Conditioning Panel >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    Refer to PROCEDURE - Step 1
  2. REMOVE CONSOLE BOX ASSEMBLY 

    Refer to REMOVAL [11/2021 - ]

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH 

    Refer to PROCEDURE - Step 3

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH 

    Refer to PROCEDURE - Step 4

  5. REMOVE CENTER NO. 2 INSTRUMENT CLUSTER FINISH PANEL 
    Refer to PROCEDURE - Step 5
  6. REMOVE INSTRUMENT SIDE PANEL RH 
    Refer to PROCEDURE - Step 8
  7. REMOVE INSTRUMENT PANEL ORNAMENT 

    Refer to PROCEDURE - Step 9

  8. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 10

  9. REMOVE METER HOOD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 11

  10. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY 
    Refer to PROCEDURE - Step 12
  11. REMOVE NAVIGATION RECEIVER WITH BRACKET 

    Refer to PROCEDURE - Step 8

  12. REMOVE AIR CONDITIONING CONTROL ASSEMBLY 
    1. GTY1049717Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY1049720Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disconnect the connector, and remove the air conditioning control assembly.
  13. REMOVE ENGINE SWITCH 

    Refer to PROCEDURE - Step 2

scientia non olet · About LEMON Manuals