LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Corolla LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 318 (Manual Transaxle System - Service Information (1 Of 2)) >> Back-Up Light Switch >> Removal [09/2022 - 11/2022] >> Procedure

Removal [09/2022 - 11/2022]: Procedure

WARNING: This page is about a different car, the 2025 Toyota GR Corolla, 2024 Toyota GR Corolla, and 2023 Toyota GR Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 9

  2. REMOVE REAR ENGINE UNDER COVER LH 

    Refer to PROCEDURE - Step 10

  3. REMOVE BACK-UP LIGHT SWITCH ASSEMBLY 
    1. Disconnect the back-up light switch assembly connector.
      GTY1109686Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using SST, remove the back-up light switch assembly and gasket from the manual transaxle assembly.
      GTY1023231Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      • SST: 09816-30010 
scientia non olet · About LEMON Manuals