LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2024 >> Corolla LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Engine Mechanical System - Service Information (1 Of 3)) >> Front Crankshaft Oil Seal >> Removal [11/2022 - 09/2024] >> Procedure

Removal [11/2022 - 09/2024]: Procedure

WARNING: This page is about a different car, the 2025 Toyota GR Corolla, 2024 Toyota GR Corolla, and 2023 Toyota GR Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT WHEEL RH 

    Refer to REMOVAL [09/2022 - ]

  2. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 9

  3. REMOVE REAR ENGINE UNDER COVER RH 

    Refer to PROCEDURE - Step 19

  4. REMOVE FRONT BUMPER ASSEMBLY (w/ Engine Under Cover Air Guide) 

    Refer to REMOVAL [09/2022 - 08/2023] , or refer to REMOVAL [08/2023 - 09/2024]

  5. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH (w/ Engine Under Cover Air Guide) 

    Refer to PROCEDURE - Step 2

  6. DRAIN WASHER FLUID (w/ Engine Under Cover Air Guide) 

    Refer to PROCEDURE - Step 4

  7. REMOVE INLET HOSE (w/ Engine Under Cover Air Guide) 

    Refer to PROCEDURE - Step 14

  8. REMOVE WINDSHIELD WASHER JAR ASSEMBLY (w/ Engine Under Cover Air Guide) 

    Refer to PROCEDURE - Step 15

  9. REMOVE NO. 2 ENGINE UNDER COVER AIR GUIDE (w/ Engine Under Cover Air Guide) 

    Refer to PROCEDURE - Step 16

  10. REMOVE FAN AND GENERATOR V BELT 

    Refer to PROCEDURE - Step 3

  11. REMOVE CRANKSHAFT PULLEY ASSEMBLY 

    Refer to PROCEDURE - Step 14

  12. REMOVE TIMING CHAIN COVER OIL SEAL 
    1. Using a screwdriver, pry out the timing chain cover oil seal.
      GTY1019808Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
      NOTE:

      Do not damage the surface of the timing chain cover oil seal press fit hole or the crankshaft.

      HINT: 

      Tape the screwdriver tip before use.

scientia non olet · About LEMON Manuals