LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2022 >> GR86 Base, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Service Information >> Trip Switch >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    Refer to PROCEDURE - Step 1
  2. STEERING WHEEL POSITION 

    See step  3

  3. REMOVE CENTER NO. 2 INSTRUMENT CLUSTER FINISH PANEL 
    Refer to PROCEDURE - Step 5
  4. REMOVE INSTRUMENT SIDE PANEL LH 
    Refer to PROCEDURE - Step 6
  5. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 7
  6. REMOVE INSTRUMENT SIDE PANEL RH 
    Refer to PROCEDURE - Step 8
  7. REMOVE INSTRUMENT PANEL ORNAMENT 

    Refer to PROCEDURE - Step 9

  8. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 10

  9. REMOVE METER HOOD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 11

  10. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY 
    Refer to PROCEDURE - Step 12
  11. REMOVE NO. 2 INSTRUMENT PANEL REGISTER SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 18
  12. REMOVE UPPER INSTRUMENT PANEL METER ORNAMENT 

    Refer to PROCEDURE - Step 21

  13. REMOVE TRIP SWITCH 
    1. GTY1050421Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals