LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Venza LE >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Ext) - Service Information >> Hazard Warning Switch >> Installation [10/2022 - ] >> Procedure

Installation [10/2022 - ]: Procedure

  1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY 
    1. Engage the 2 claws to install the hazard warning signal switch assembly as shown in the illustration.
      GTY988523Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
  2. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 8 Inch Display) 

    Refer to PROCEDURE - Step 5

  3. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for 12.3 Inch Display) 

    Refer to PROCEDURE - Step 10

  4. INSTALL CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL 

    Refer to PROCEDURE - Step 14

scientia non olet · About LEMON Manuals