LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Venza LE >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Service Information >> Trip Switch >> Installation [07/2020 - ] >> Procedure

Installation [07/2020 - ]: Procedure

  1. INSTALL TRIP SWITCH 
    1. Engage the 2 claws to install the trip switch.
  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 19 [07/2020 - 10/2022] , or refer to PROCEDURE - Step 18 [10/2022 - ]

  3. INSTALL UPPER CONSOLE COVER 

    Refer to PROCEDURE - Step 13

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 28 [07/2020 - 10/2022] , or refer to PROCEDURE - Step 27 [10/2022 - ]

  5. INSTALL COWL SIDE TRIM BOARD LH 

    Refer to PROCEDURE - Step 51 [07/2020 - 10/2022] , or refer to PROCEDURE - Step 51 [10/2022 - ]

  6. INSTALL FRONT DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 53 [07/2020 - 10/2022] , or refer to PROCEDURE - Step 53 [10/2022 - ]

scientia non olet · About LEMON Manuals