LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> RAV4 Prime XSE >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Motor Systems >> Hybrid Battery Control System (PHEV) - Service Information (2 Of 3) >> Charge Indicator >> Removal [06/2020 - 12/2021] >> Procedure

Removal [06/2020 - 12/2021]: Procedure

  1. PRECAUTION 
    NOTE:

    After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.

    Refer to BEFORE DISCONNECTING BATTERY [06/2020 - 10/2022]

  2. REMOVE INLET AC CHARGER CABLE 

    Refer to REMOVAL [06/2020 - 12/2021]

  3. REMOVE EV CHARGER LID SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 20

  4. REMOVE EV CHARGER LID INDICATOR ASSEMBLY 
    1. GTY998295Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Disconnect the connector.

    2. Remove the 2 nuts and EV charger lid indicator assembly from the battery charger connector opening lid sub-assembly.
      GTY998294Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE SPOT LIGHT WIRE 
    1. Disengage the claw and remove the spot light wire from the EV charger lid indicator assembly.
      GTY998293Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002