LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> RAV4 Prime SE >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats - Service Information (2 Of 2) (PHEV) >> Rear Seat Cushion Heater >> Removal [06/2020 - ] >> Procedure

Removal [06/2020 - ]: Procedure

  1. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY 

    Refer to PROCEDURE - Step 1

  2. REMOVE REAR SEAT CUSHION LOCK HOOK 

    Refer to PROCEDURE - Step 2

  3. REMOVE BENCH TYPE REAR SEAT CUSHION COVER 

    Refer to PROCEDURE - Step 1

  4. REMOVE REAR SEAT CUSHION HEATER ASSEMBLY LH 
    1. Detach the clamp.
      GTY1010945Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Slit
    2. Pass the wire harness of rear seat cushion heater assembly LH through the slit of bench type rear seat cushion cover.
    3. Remove the 18 tack pins and rear seat cushion heater assembly LH from the bench type rear seat cushion cover.
      NOTE:

      Be careful not to damage the bench type rear seat cushion cover and rear seat cushion heater assembly.

      GTY1010583Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE REAR SEAT CUSHION HEATER ASSEMBLY RH 
    1. Detach the clamp.
      GTY1010540Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 18 tack pins and rear seat cushion heater assembly RH from the bench type rear seat cushion cover.
      NOTE:

      Be careful not to damage the bench type rear seat cushion cover and rear seat cushion heater assembly.

      GTY1010579Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals