LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Prius Prime XLE >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Service Information) (1 Of 2) >> Hood >> Disassembly [09/2016 - ] >> Procedure

Disassembly [09/2016 - ]: Procedure

  1. REMOVE HOOD INSULATOR 
    1. Using a clip remover, remove the 6 hood insulator clips.
      GTY730730Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 guides to remove the hood insulator.
  2. REMOVE WASHER NOZZLE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  3. DISCONNECT WASHER HOSE ASSEMBLY 
    1. Disengage the 5 clamps.
      GTY730732Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the grommet and disconnect the washer hose assembly.
  4. REMOVE HOOD STAY HOLDER 
    1. Disengage the 2 claws to remove the hood stay holder.
      GTY730731Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE HOOD SUPPORT ASSEMBLY 
    1. Disengage the 3 claws to remove the hood support assembly.
      GTY730736Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE HOOD STAY BRACKET 
    1. Remove the bolt.
      GTY730735Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the guide to remove the hood stay bracket.
scientia non olet · About LEMON Manuals