LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Mirai XLE >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Motor Systems >> Hybrid Battery Control System - Service Information (4 Of 6) >> Sub Radiator >> Removal [12/2023 - ] >> Procedure

Removal [12/2023 - ]: Procedure

  1. REMOVE RADIATOR WITH CONDENSER 

    Refer to REMOVAL [12/2023 - ]

  2. REMOVE REAR RADIATOR SIDE AIR GUIDE PLATE LH 

    Refer to PROCEDURE - Step 38

  3. REMOVE NO. 1 DISCHARGE HOSE SUB-ASSEMBLY 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 Refer to PROCEDURE - Step 39
  4. REMOVE CONDENSER ASSEMBLY 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 Refer to PROCEDURE - Step 3
  5. REMOVE NO. 1 FC INVERTER COOLING PIPE 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 Refer to PROCEDURE - Step 41
  6. REMOVE NO. 5 FC INVERTER COOLING PIPE 
    GTY993405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    		 Refer to PROCEDURE - Step 42
  7. REMOVE EV RADIATOR ASSEMBLY 
    1. GTY1003956Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction (1) Remove in this Direction (2)
      1. Detach the claw and guide and remove the EV radiator assembly as shown in the illustration.
        NOTE:

        Do not damage the EV radiator assembly and radiator assembly when removing the EV radiator assembly.

scientia non olet · About LEMON Manuals