LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System - Service Information (1 Of 2) (Except Hybrid) >> FRONT SEAT SIDE AIRBAG ASSEMBLY (for TMMK Made) >> Installation [06/2017 - ] >> Procedure

Installation [06/2017 - ]: Procedure

  1. INSTALL FRONT SEAT AIRBAG ASSEMBLY 
    1. Install the front seat airbag assembly with 2 new nuts.

      Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

      NOTE:
      • Do not reuse the nuts.
      • Make sure that the front seatback frame sub-assembly is not deformed. If it is deformed, replace it with a new one.
    2. Engage the clamp.
  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Manual Seat) 

    Refer to PROCEDURE - Step 21 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 21 [09/2019 - ]

  3. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Power Seat) 

    Refer to PROCEDURE - Step 23 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 25 [09/2019 - ]

  4. INSTALL FRONT SEAT HEADREST SUPPORT (for Manual Seat) 

    Refer to PROCEDURE - Step 22 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 22 [09/2019 - ]

  5. INSTALL FRONT SEAT HEADREST SUPPORT (for Power Seat) 

    Refer to PROCEDURE - Step 24 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 26 [09/2019 - ]

  6. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY (for Manual Seat) 

    Refer to PROCEDURE - Step 23 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 23 [09/2019 - ]

  7. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY (for Power Seat) 

    Refer to PROCEDURE - Step 25 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 27 [09/2019 - ]

  8. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Manual Seat) 

    Refer to PROCEDURE - Step 25 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 25 [09/2019 - ]

  9. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Power Seat) 

    Refer to PROCEDURE - Step 30 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 32 [09/2019 - ]

  10. INSTALL FRONT SEAT CUSHION SHIELD (for Manual Seat) 

    Refer to PROCEDURE - Step 26 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 26 [09/2019 - ]

  11. INSTALL FRONT SEAT CUSHION SHIELD (for Power Seat) 

    Refer to PROCEDURE - Step 31 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 33 [09/2019 - ]

  12. INSTALL RECLINING ADJUSTER RELEASE HANDLE (for Manual Seat) 

    Refer to PROCEDURE - Step 27 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 27 [09/2019 - ]

  13. INSTALL VERTICAL ADJUSTING HANDLE (for Manual Seat) 

    Refer to PROCEDURE - Step 28 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 28 [09/2019 - ]

  14. INSTALL FRONT SEAT FRONT CUSHION SHIELD (for Power Seat) 

    Refer to PROCEDURE - Step 32 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 34 [09/2019 - ]

  15. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Manual Seat) 

    Refer to PROCEDURE - Step 29 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 29 [09/2019 - ]

  16. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Power Seat) 

    Refer to PROCEDURE - Step 33 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 35 [09/2019 - ]

  17. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat) 

    Refer to INSTALLATION [06/2017 - ]

  18. INSTALL FRONT SEAT ASSEMBLY (for Power Seat) 

    Refer to INSTALLATION [06/2017 - 09/2019] , or refer to INSTALLATION [09/2019 - ]

  19. PERFORM DIAGNOSTIC SYSTEM CHECK 

    Refer to DTC CHECK / CLEAR [03/2017 - ]

scientia non olet · About LEMON Manuals