Installation [06/2017 - ]: Procedure

INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY RH

Install the front seat cushion heater assembly RH to the separate type front seat cushion cover with 32 new tag pins.

INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER
Refer to PROCEDURE - Step 14 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 14 [09/2019 - ]
INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
Refer to PROCEDURE - Step 15 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 15 [09/2019 - ]
INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY
Refer to PROCEDURE - Step 23 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 23 [09/2019 - ]
INSTALL FRONT SEAT INNER CUSHION SHIELD RH
Refer to PROCEDURE - Step 25 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 25 [09/2019 - ]
INSTALL FRONT SEAT CUSHION SHIELD RH
Refer to PROCEDURE - Step 26 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 26 [09/2019 - ]
INSTALL RECLINING ADJUSTER RELEASE HANDLE RH
Refer to PROCEDURE - Step 27 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 27 [09/2019 - ]
INSTALL VERTICAL ADJUSTING HANDLE RH
Refer to PROCEDURE - Step 28 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 28 [09/2019 - ]
CONNECT SEPARATE TYPE FRONT SEATBACK COVER
Refer to PROCEDURE - Step 29 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 29 [09/2019 - ]
INSTALL FRONT SEAT ASSEMBLY RH
Refer to INSTALLATION [06/2017 - 09/2019] , or refer to INSTALLATION [09/2019 - ]