LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Panels / Trim - Service Information (1 Of 2) (Except Hybrid) >> Front Console Box >> Removal [03/2017 - 06/2017] >> Procedure

Removal [03/2017 - 06/2017]: Procedure

  1. REMOVE NO. 1 METER HOOD CLUSTER 
    1. Apply protective tape to the area shown in the illustration.
      GTY925332Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape
    2. Disengage the 3 clips in the order shown in the illustration.
      GTY749614Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hand Here
      Remove in this Direction
    3. Disengage the 4 clips and 3 guides in the order shown in the illustration.
      GTY750221Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hand Here
      Remove in this Direction
    4. Disconnect the connector to remove the No. 1 meter hood cluster.
  2. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY 
    1. Disengage the 5 clips in the order shown in the illustration.
      GTY754266Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hand Here
      Remove in this Direction
    2. Disengage the 6 clips in the order shown in the illustration to remove the No. 2 instrument panel garnish sub-assembly.
      GTY756451Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hand Here
      Remove in this Direction
  3. REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH 
    1. Disengage the clip, claw and 2 guides to remove the instrument panel finish plate garnish as shown in the illustration.
      GTY758619Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  4. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL 
    1. Disengage the 2 clips as shown in the illustration.
      GTY762009Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hand Here
      Remove in this Direction
    2. Disengage the 5 clips as shown in the illustration.
      GTY773883Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hand Here
      Remove in this Direction
    3. Disengage the clamp.
    4. Disconnect each connector to remove the lower center instrument panel finish panel.
  5. REMOVE SHIFT LOCK RELEASE BUTTON COVER 

    Refer to PROCEDURE - Step 2

  6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  7. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY 
    1. Move the shift lever to N.
    2. Using a moulding remover, disengage the 2 claws and 2 clips as shown in the illustration.
      GTY769502Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Insert Moulding Remover Here Remove in this Direction
    3. Disengage the 5 claws and 4 clips as shown in the illustration.
      GTY746122Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hand Here Remove in this Direction
    4. Disengage the clamp.
    5. Disconnect each connector to remove the rear upper console panel sub-assembly.
  8. REMOVE SHIFT POSITION INDICATOR 

    Refer to PROCEDURE - Step 1

  9. REMOVE FRONT CONSOLE BOX INSERT SUB-ASSEMBLY 
    1. Remove the 5 screws and front console box insert sub-assembly.
      GTY746795Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE INSTRUMENT PANEL CUP HOLDER 
    1. Remove the 3 screws.
      GTY746792Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 claws to remove the instrument panel cup holder.
      GTY746793Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY 
    1. Disengage the 4 clips as shown in the illustration.
      GTY753792Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hand Here
      Remove in this Direction
    2. Disengage the 6 claws to remove the console rear end panel sub-assembly as shown in the illustration.
      GTY771725Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hand Here
      Remove in this Direction
  12. REMOVE CONSOLE BOX CARPET 
    1. Remove the console box carpet as shown in the illustration.
      GTY764409Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  13. REMOVE CONSOLE BOX ASSEMBLY 
    1. Remove the 4 bolts, 2 screws and console box assembly.
      GTY746798Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002