LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission System (UB80E) - Service Information (2 Of 3) (Except Hybrid) >> Shift Lever >> Disassembly [03/2017 - ] >> Procedure

Disassembly [03/2017 - ]: Procedure

  1. REMOVE SHIFT POSITION INDICATOR 
    1. Disengage the 2 clamps to disconnect the wire harness.
      GTY773307Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws.
      GTY762204Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 2 claws and remove the shift position indicator from the rear upper console panel sub-assembly.
      GTY762205Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE LOWER POSITION INDICATOR HOUSING 
    1. Disengage the 4 claws and 2 guides to remove the lower position indicator housing from the shift lock control unit assembly.
      GTY762206Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not damage the lower position indicator housing.

scientia non olet · About LEMON Manuals