LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Monitor System - Service Information (Except Hybrid) >> Clearance Warning Buzzer >> Removal [06/2017 - 10/2020] >> Procedure

Removal [06/2017 - 10/2020]: Procedure

  1. REMOVE NO. 1 METER HOOD CLUSTER 

    Refer to PROCEDURE - Step 1 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 1 [09/2019 - 03/2020] , or refer to PROCEDURE - Step 1 [03/2020 - ]

  2. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 2 [09/2019 - 03/2020] , or refer to PROCEDURE - Step 2 [03/2020 - ]

  3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 22

  4. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY 

    Refer to PROCEDURE - Step 23

  5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for 7 Inch Display) 

    Refer to PROCEDURE - Step 4

  6. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 7 Inch Display) 

    Refer to PROCEDURE - Step 8

  7. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 8 Inch Display) 

    Refer to PROCEDURE - Step 9

  8. REMOVE NO. 1 CLEARANCE WARNING BUZZER 
    1. Disengage the clamp.
      GTY752483Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector to remove the No. 1 clearance warning buzzer.
scientia non olet · About LEMON Manuals