Removal [10/2017 - 05/2018]: Procedure

Refer to PROCEDURE - Step 7

Refer to PROCEDURE - Step 2

• for HFC-134a (R134a):

  Refer to PROCEDURE - Step 1

• for HFO-1234yf (R1234yf):

  Refer to PROCEDURE - Step 1

• for Halogen Headlight:

  Refer to REMOVAL [10/2017 - 09/2019]

• for LED Headlight:

  Refer to REMOVAL [10/2017 - 09/2019]

HINT: 

Use the same procedure as for the LH side.

1. Remove the 4 bolts and No. 1 air cleaner inlet from the upper radiator support sub-assembly and air cleaner case sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the 4 bolts and front bumper upper reinforcement sub-assembly from the vehicle.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to PROCEDURE - Step 18 [10/2017 - 12/2017] , or refer to PROCEDURE - Step 18 [12/2017 - 09/2019]

Refer to PROCEDURE - Step 19 [10/2017 - 12/2017] , or refer to PROCEDURE - Step 19 [12/2017 - 09/2019]

Refer to PROCEDURE - Step 8

• w/ Engine Hood Courtesy Switch:

  Refer to PROCEDURE - Step 3

• w/o Engine Hood Courtesy Switch:

  Refer to PROCEDURE - Step 9

1. Disengage the clamp to disconnect the hood control cable sub-assembly from the upper radiator support sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Disengage the 3 clamps to disconnect the wire harness from the horn and hood lock support assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

3. Disengage the clamp to disconnect the wire harnesses from the cooling fan ECU and fan shroud.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

4. Remove the 5 bolts and upper radiator support sub-assembly together with hood lock support sub-assembly from the vehicle.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disengage the 4 claws to remove the No. 2 radiator air guide from the radiator assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the 2 bolts, and disconnect the radiator pipe from the fan shroud.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Slide the clip and disconnect the No. 1 water by-pass hose from the radiator assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disengage the 4 clamps from the fan shroud.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Slide the clip and disconnect the No. 3 water by-pass hose from the radiator assembly.

1. Slide the clip and disconnect the No. 3 radiator hose from the radiator assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disengage the clamp from the fan shroud.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Slide the clip and disconnect the No. 2 radiator hose from the radiator assembly.

Refer to PROCEDURE - Step 20 [10/2017 - 12/2017] , or refer to PROCEDURE - Step 20 [12/2017 - 09/2019]

Refer to PROCEDURE - Step 23 [10/2017 - 12/2017] , or refer to PROCEDURE - Step 23 [12/2017 - 09/2019]

Refer to PROCEDURE - Step 29 [10/2017 - 12/2017] , or refer to PROCEDURE - Step 29 [12/2017 - 09/2019]

Refer to PROCEDURE - Step 30 [10/2017 - 12/2017] , or refer to PROCEDURE - Step 30 [12/2017 - 09/2019]

Refer to PROCEDURE - Step 19

Refer to PROCEDURE - Step 20

Refer to PROCEDURE - Step 21

1. Remove the radiator assembly together with the fan shroud assembly from the vehicle.
2. Disengage the 2 claws.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

3. Disengage the 2 guides, and remove the fan shroud assembly from the radiator assembly.
   NOTE:

   Do not damage the radiator assembly when removing the fan shroud assembly.

1. Remove the 2 radiator support cushions from the radiator assembly.

1. Remove the 2 radiator support grommets from the radiator assembly.

1. Remove the radiator drain cock plug.
2. Remove the O-ring from the radiator drain cock plug.