LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> C-HR LE >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) - Service Information (2 Of 2) >> Hood >> Disassembly [02/2017 - ] >> Procedure

Disassembly [02/2017 - ]: Procedure

  1. REMOVE HOOD SIDE PANEL LH 
    1. Using a clip remover, disengage the clips to remove the hood side panel LH.
      GTY746338Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE HOOD SIDE PANEL RH 

    HINT: 

    Use the same procedure as for the LH side.

  3. REMOVE HOOD INSULATOR 
    1. Using a clip remover, remove the 8 clips.
      GTY741341Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the guides to remove the hood insulator.
  4. REMOVE HOLE PLUG 
    1. Remove the 2 hole plugs.
      GTY741342Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE WASHER NOZZLE SUB-ASSEMBLY 

    Refer to PROCEDURE - STEP 1

  6. DISCONNECT WASHER HOSE ASSEMBLY 
    1. Disconnect the washer hose assembly from the clamps and guide.
      GTY774673Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Clamp
      *b Guige
    2. Remove the 7 clamps.
      GTY741352Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals