Installation [04/2018 - ]: Procedure
- INSTALL METER MIRROR WIRE
- Engage the clamp and claw.
- Connect the connector to install the meter mirror wire.
- INSTALL METER MIRROR SUB-ASSEMBLY
- Install the meter mirror sub-assembly with the 3 screws.
- INSTALL DEFROSTER NOZZLE ASSEMBLY
Refer to PROCEDURE - Step 12
- INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT
Refer to PROCEDURE - Step 13
- INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT
Refer to PROCEDURE - Step 14
- INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
Refer to INSTALLATION [04/2018 - ]