Installation [08/2019 - ]: Procedure

INSTALL ACCESSORY SOCKET WIRE
1. Attach the 3 clamps to install the accessory socket wire.

INSTALL USB CHARGER SOCKET

Engage the 4 claws to install the USB charger socket.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Install in this Direction

INSTALL REAR CONSOLE END PANEL
Refer to PROCEDURE - Step 15
INSTALL NO. 1 POWER OUTLET SOCKET COVER
1. Engage the 2 claws to install the No. 1 power outlet socket cover.
INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY
1. Engage the claw to install the No. 1 power outlet socket assembly.
2. Connect the connector.
INSTALL REAR CONSOLE BOX ASSEMBLY
Refer to PROCEDURE - Step 1
INSTALL NO. 2 CONSOLE BOX RETAINER
Refer to PROCEDURE - Step 2
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 3
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for VF2A)
Refer to PROCEDURE - Step 4
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Refer to PROCEDURE - Step 5
INSTALL FRONT NO. 2 CONSOLE BOX INSERT
Refer to PROCEDURE - Step 7
INSTALL FRONT NO. 1 CONSOLE BOX INSERT
Refer to PROCEDURE - Step 6
INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
Refer to PROCEDURE - Step 3
INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
Refer to PROCEDURE - Step 8