Installation [08/2019 - ]: Procedure

1. Connect each connector.
2. Attach the 2 guides.
3. Install the rear console box assembly with the 4 bolts and 2 screws.

1. Attach the clip, 2 claws and 2 guides to install the No. 2 console box retainer.

1. Connect each connector.
2. Attach the 10 clips to install the upper console panel sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   TEXT IN ILLUSTRATION
   
   

   *A	for VF2A	*B	for VF2CM, VF4BM
   *C	for 2WD	-	-

1. Install the shift lever knob sub-assembly and turn it in the direction indicated by the arrow.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the shift lever knob sub-assembly and turn it in the direction indicated by the arrow.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Attach the 2 clips and 2 guides to install the front No. 1 console box insert.

1. Attach the 2 clips and guide to install the front No. 2 console box insert.

1. Attach the 5 clips to install the No. 1 instrument cluster finish panel garnish.

Refer to PROCEDURE - Step 3