Installation [08/2015 - ]: Procedure

1. Install the No. 1 speaker mounting bracket with the 2 bolts.

   Torque: 2.5 N*m (25 kgf*cm, 22 in.*lbf) 

1. Connect the connector.
2. Align the positioning pins of the front No. 2 speaker assembly with the instrument panel sub-assembly to temporarily install the front No. 2 speaker assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   TEXT IN ILLUSTRATION
   
   

   *A

   for 9 Speakers

   *B

   for 8 Speakers

3. Install the front No. 2 speaker assembly with the 2 screws.

   Torque: 2.5 N*m (25 kgf*cm, 22 in.*lbf) 

   NOTE:

   • Do not touch the cone of the front No. 2 speaker assembly.
   • When installing the front No. 2 speaker assembly to the instrument panel sub-assembly, be careful that the wires do not get caught between the parts.

Refer to PROCEDURE - Step 5 [08/2015 - 08/2019] , or refer to PROCEDURE - Step 5 [08/2019 - 08/2022] , or refer to PROCEDURE - Step 5 [08/2022 - ]

Refer to PROCEDURE - Step 69 [08/2015 - 08/2019] , or refer to PROCEDURE - Step 70 [08/2019 - ]