Installation [08/2020 - ]: Procedure

INSTALL SPARK PLUG
HINT:

Perform "Inspection After Repair" after replacing a spark plug.

Refer to INITIALIZATION [08/2020 - 12/2021] , or refer to INITIALIZATION [12/2021 - 11/2024] , or refer to INITIALIZATION [11/2024 - ]
1. Install the 4 spark plugs to the cylinder head sub-assembly.
  Torque: 20 N.m (204 kgf/cm, 15 ft.lbf)
  
  NOTE:
  If a spark plug has been struck or dropped, replace it.
INSTALL IGNITION COIL ASSEMBLY
Refer to PROCEDURE - Step 2
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 58 [08/2020 - 12/2021] , or refer to PROCEDURE - Step 58 [12/2021 - ]