Removal [04/2018 - 08/2021]: Procedure
WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE STEERING WHEEL ASSEMBLY
Refer to REMOVAL [04/2018 - 08/2020] , or refer to REMOVAL [08/2020 - 08/2021]
- REMOVE STEERING PAD SWITCH ASSEMBLY
Refer to PROCEDURE - Step 2
- REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)
- Remove the 2 screws.
- Disengage the 4 claws.
- Disengage the 2 clamps to disconnect the shift paddle switch (transmission shift switch assemby) from the steering wheel assembly.
- Disconnect the No. 1 transmission shift switch assembly connector and No. 2 transmission shift switch assembly connector to remove the No. 1 transmission shift switch assembly and No. 2 transmission shift switch assembly from the No. 1 switch wire.
*1 No. 1 Transmission Shift Switch Assembly *2 No. 2 Transmission Shift Switch Assembly
- Remove the 2 screws.
- REMOVE NO. 1 SWITCH WIRE
HINT:
Perform this procedure only when replacement of the No. 1 switch wire is necessary.