LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Prius XLE >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (Steering Column (Service Information)) >> Steering Pad Switch >> Removal [04/2018 - 08/2021] >> Procedure

Removal [04/2018 - 08/2021]: Procedure

WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE HORN BUTTON ASSEMBLY 

    Refer to REMOVAL [04/2018 - 08/2020] , or refer to REMOVAL [08/2020 - 08/2021]

  2. REMOVE STEERING PAD SWITCH ASSEMBLY 
    1. Disconnect the steering pad switch connector from the spiral cable with sensor sub-assembly.
    2. Remove the 2 screws.
      GTY742698Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 4 claws and 3 pins to remove the steering pad switch assembly.
scientia non olet · About LEMON Manuals